Chromium Carbide Overlay Wear Solutions
CCO Wear Solutions for Severe Abrasion
HALDEN supplies custom chromium carbide overlay plates, wear liners, wear pipes and fabricated wear parts for plants where abrasion, downtime and replacement cost are already affecting operation.
Send us your drawing, worn part photos or working condition. Our team can help you select CCO plate, CCO pipe, liner kits or OEM replacement wear parts for your application.
- 2,000 m²
- Monthly CCO plate capacity
- ISO
- Quality managed production
- Custom
- Plates, liners, pipes and parts
Built for abrasion-heavy operation
Chutes, hoppers, bins, crusher areas, conveying lines and OEM replacement components.
Site Wear Problems
When Standard Steel Is Not Enough
In many cement plants, mines, aggregate plants, steel mills and power plants, the problem is not only material wear. It is unplanned shutdown, difficult liner replacement, expensive OEM parts and maintenance teams losing time on repeated repairs.
HALDEN's wear solution pages are built around these site problems, not around generic material definitions.
- Transfer chute liners wearing through in a few months.
- Hopper and bin liners thinning in high-flow areas.
- Crusher feed and discharge liners failing under abrasion and impact.
- Pipe elbows and bends leaking because of abrasive conveying.
- OEM wear parts costing too much or taking too long to arrive.
Recommended Wear Solutions
Select the Right CCO Format for the Wear Zone
Chromium carbide overlay is suitable for severe sliding abrasion where standard steel or common abrasion resistant plate cannot provide enough service life. HALDEN can supply flat CCO plates, fabricated liner kits, rolled pipe sections, elbows, bends and replacement parts according to drawings.
High Abrasion + Moderate Impact
CCO wear plates and liners are often used for chutes, hoppers, bins, feeders, crusher zones and transfer points where sliding abrasion drives replacement frequency.
Abrasive Conveying Lines
CCO pipes and hardfaced elbows can protect high-wear pipe sections, bends and elbows in cement, mining, power plant, aggregate and glass recycling systems.
Complex Equipment Parts
HALDEN can manufacture ready-to-install wear parts from drawings or samples when OEM parts are costly, delayed or need an upgraded wear-resistant structure.
Solution Modules
Plates, Pipes, Liners and Replacement Parts
CCO Wear Plates
HALDEN CCO wear plates are used for chutes, hoppers, bins, feeders, crusher liners, fan housings and other high-abrasion areas. They can be supplied as standard plates or cut into liner shapes according to drawings.
CCO Wear Pipes
CCO wear pipes are used for abrasive dry bulk material or slurry conveying, especially elbows, bends and short high-wear pipe sections. They are suitable for cement, mining, power plant, aggregate and glass recycling applications.
Custom Wear Liners
HALDEN can manufacture transfer chute liners, crusher liners, hopper liners, bucket liners, screw conveyor liners and fan housing liners. Liners can be supplied with holes, studs, countersunk holes or welded assemblies.
OEM Replacement Wear Parts
When original parts are expensive or have long lead times, HALDEN can manufacture replacement wear parts according to drawings, samples or worn part measurements. Standard steel parts can also be upgraded to CCO or hardfaced structures.
Fabrication Capability
Delivered as Installable Wear Parts, Not Only Raw Plates
HALDEN supports custom sizes, cutting, rolling, welding, assembly, bolt holes, countersunk holes, stud welding, part marking and export packaging. The goal is to deliver wear parts that are easier to install, not only raw plates that require extra work at site.
Send Drawings for ReviewCutting & Shaping
Custom plate sizes, liner profiles, nested layouts and shaped parts according to drawing requirements.
Rolling & Pipe Sections
Rolled CCO sections, elbows, bends and short high-wear conveying components for abrasive service.
Holes, Studs & Welding
Bolt holes, countersunk holes, stud welding, welded assemblies and liner kit preparation.
Marking & Packaging
Part marking, layout confirmation and export packaging for easier identification and site installation.
Quality and Delivery
Controlled Inspection Before Delivery
Quality control can include hardness inspection, dimensions, welding inspection, surface appearance, liner layout confirmation and packing checks. For export projects, HALDEN can package plates, pipe sections and fabricated parts according to sea freight requirements.
Hardness Inspection
Dimension Checks
Welding Inspection
Surface Appearance
Layout Confirmation
Export Packing Checks
Quotation Information Needed
Send the Details Needed to Recommend the Right Solution
The more application information you provide, the faster HALDEN can recommend a suitable CCO plate, pipe, liner kit or fabricated wear part structure.
Helpful files
Drawings, worn part photos, liner layout sketches, site measurements, current service life and material flow information help our engineers review your wear problem accurately.
Related Wear Solutions
Explore Connected HALDEN Solutions
Use these internal solution pages to compare plates, pipes, liners, OEM parts and industry-specific wear applications.
FAQ
Chromium Carbide Overlay Questions
What is chromium carbide overlay used for?
It is used in severe abrasion areas such as chutes, hoppers, crusher liners, conveyor transfer points, fan housings and abrasive conveying pipes.
Can HALDEN make parts according to drawings?
Yes. HALDEN can manufacture CCO plates, liners, pipes and fabricated wear parts according to drawings, worn samples or site measurements.
Can you supply ready-to-install liner kits?
Yes. Liners can be cut, drilled, welded, marked and packed as liner kits before delivery.
What should I send for a quote?
Please send drawings, photos, material handled, working temperature, current service life, required quantity and delivery destination.
Start Your Wear Solution Project
Send Your Drawing, Worn Part Photos or Working Condition
HALDEN can review your application and recommend CCO plates, CCO pipes, liner kits or custom OEM replacement wear parts for cement, mining, aggregate, steel and bulk material handling systems.
Fast Review Checklist
- Share current wear life and failure location.
- Attach drawing, sample photos or site measurements.
- Confirm handled material, temperature, impact and abrasion type.
- Provide quantity, destination port and delivery terms.
SEO Focus
Custom CCO plates, wear liners, wear pipes and fabricated wear parts for heavy industrial abrasion control.